Free UPS & USPS Ground Shipping to the Lower 48 States.
CUSTOMER HOTLINE 1-888-334-2177
Office Hours Monday-Friday 8:30 to 5:00 EST

Phones Also Answered 8:30 AM to 8:00 PM EST Monday, Wednesday & Thursday

View Cart | Checkout


FREE UPS & USPS GROUND SHIPPING - for orders to the lower 48 US states

QuickShip Metals ships the same business day on orders received before 2:00 PM EST

SHOP FOR TRIM & MOLDING 304 Brushed Stainless Link
Shop for Sheet Metals
DIY Network Logo

Call in and SAVE 10%

Home > Sheet Metal Installation & Adhesives


Using Adhesives, Cutting Outlet Holes and more...

QuickShipMetals sells decorative stainless, copper and brass sheet metal in easy to cut thicknesses.

Plus, we can custom cut in sheets in widths up to 36" and up to 48" in length.

Slides shown to the right were taken from one of QuikShip's company bathroom installations, but the technique is the same whether its back splashes in the kitchen or decorating throughout the home or workplace.

Liquid Nails® D.I.Y. Kit

with Caulk Gun and Adhesive Scraper


Liquid NailsŪ Polyurethane adhesive with excellent low-temp flexibility forms a strong bond indoors and outdoors. Works on a wide range of materials and surfaces.

This kit includes 1 tube of Liquid Nails Polyurethane, 1 caulk gun and a 4" x 4" scraping trowel.

Only $28.86 with FREE SHIPPING
Liquid Nails Installation Kit
Please Note: The Liquid Nails® Kit is non returnable.
Quick Tips...

Surface Preparation: Surfaces must be clean, structurally sound and free of loose particles. For smooth surfaces, adhesion can be improved by lightly sanding bond areas prior to applying adhesive. Wear gloves when using this product.

Product Application: Insert cartridge into a standard caulk gun and puncture inner seal with a nail or wire. Apply a 1/4" wide bead of adhesive to one of the surfaces to be bonded. Join the surfaces together within 30 minutes and press firmly so that the adhesive is 1/16" to 1/8" in thickness. Use mechanical fasteners or bracing to hold surfaces together until the adhesive has set (about 8 to 12 hours, depending on temperature, humidity and porosity of the surfaces). Do not use this product at temperatures below 40° F.

Drying Time: Product will normally dry within 8 to 12 hours. Actual dry time may vary with temperature, humidity and materials used. Cleanup: Cleanup wet adhesive with mineral spirits or toluene. Remove dry adhesive by scraping.


8:30 AM to 5:00 PM Eastern Time

Home | About Us | Contact Us | View Cart | Terms & Conditions | Privacy

BACK SPLASH INSTALLATION GUIDE Backsplash Installation Guide Link


Wall plate cutouts are measured,
drawn and opened by cutting jigsaw
holes, using a drill with a bi-metal
hole cutting bit.

Rutland 500º RTV High-Heat® Silicone Sealer
Sorry, no returns.
Shop QuickShipMetals.com
Stainless Steel
Diamond Plate
Decorative Metals
Metal Foils
Trim and Molding
The Website
About Us
Contact Us
View Cart
Terms and Conditions
Terms of Use
FREE Info-Uploads from QuickShipMetals
Free Consumer Guides
  BBB Ac YAHOO! 5-Star Rated Online Store
Friend Us on FacebookFor QuickShipMetals' Friends
Pin us on PintrestFor QuickShipMetals' Pins
  Quick Ships UPS and USPS QuckShip Accepts
For QuickShipMetals' Tweets


QuickShipMetals Recycles QuickShipMetals.com sells 100% recyclable metals.

Copyright 2016 by QuickShipMetals.com