By Frank Ross
When a customer emailed our customer service department wanting information on how to install a decorative stainless steel backsplash, Charlene jumped in quickly to help. The customer wanted to redo her cooking counter top area and did not know about installation, measuring for this product, or how to install it. However, she was not lacking in enthusiasm and that’s the first ingredient in a recipe for a good project! She liked the random swirl decorative stainless steel and wanted to add that beautiful metal on the walls surrounding the cook top.
Charlene explained that the first step in the process was to start off with some measurements. She asked for careful measurement of the width and length of the space the customer wanted to cover. She explained that when working with metal precise measurements are mandatory to ensure a first-time fit. To make it easier on the craftsmen who will be preparing the backspash and to avoid any misunderstanding, it is best to do a rough sketch of the area, include the measurements and fax or scan and email it into our production specialists.
From the sketch and measurements, Storm’s experienced staff can determine how many pieces are needed and provide you a price quote quickly and accurately. Once an order is finalize the customer should receive their product in just a couple of days.
While Storm’s staff can do any custom cutting work, it is sometimes best to make final fitting detail work on site. This is especially true when angles or unusual shapes are involved. To create the holes required for outlet receptacles or switches, you need to measure twice from opposite sides to make sure you’ve not made a mistake. Once you’re marked the area to be removed, drill a pilot hole large enough to accept the metal blade of a hand-held jig saw and make the cut. You’ll want to file the edges a bit to reduce burrs that could get in a finger or palm during installation.
Storm also offers the adhesive required to apply the backsplash, and tips on making the installation quick and easy. Metal is actually not difficult to install. Follow these simple steps.
1. Apply the adhesive to the stainless steel backsplash and position it in place.
2. Add a couple of strips of painter’s tape to hold it in place, while the adhesive sets up.
3. Let the backsplash adhesive cure for 24 hours before removing the tape and the PVC coating on the metal.
4. Stand back and admire your new backsplash and a job well done!
If you would like to add the beauty and functionality of metal to your kitchen, give the friendly customer service folks at call at 1-888-334-2177 or link up to a live chat session at QuickShipMetals.com. They’re always happy to help!
